Modifiche al passo #6
Modifica di Alex Diaz-Kokaisl —
Modifica approvata da Alex Diaz-Kokaisl
- Prima di
- Dopo il
- Invariato
Righe Passo
| - | [* |
|---|---|
| + | [* icon_note] This is a good point to power on your phone and test all functions before sealing it up. Be sure to power your phone back down completely before you continue working. |
| [* black] Align the back cover with its original position on the frame. | |
| [* black] Press down on the perimeter of the adhesive to bond the adhesive to the back cover. | |
| [* icon_reminder] To ensure a good seal, apply constant pressure to the back cover with a flat, heavy object. A hefty book works well. | |
| [* icon_note] If a substantial gap remains, try squeezing the gap with your fingers ***but don't force it***. Pry the back cover off and check for any surface irregularities, such as unseated connectors or loose and jutting screws. |