Modifiche al passo #6
Modifica di Coleman Oei —
Modifica approvata da Coleman Oei
- Prima di
- Dopo il
- Invariato
Righe Passo
| [title] Add markings on your hub for the kick lock | |
| [* black] The way the kick lock works is just by pushing a metal pin into a metal plate that has valleys and ridges. That metal plate is screwed into the same spot as the disc brake | |
| [* black] The original hub has markings on the top of the hub that indicate where a valley in that plate is. You can add these markings in with a white paint pen. | |
| - | [* black] Lightly screw in the metal plate for reference |
| + | [* black] Lightly screw in the metal plate into the new hub for reference |
| [* black] Try to replicate the lines on the original hub by placing the lines on the new hub lined up with the center of each valley in the plate. | |
| - | [* |
| + | [* icon_reminder] Try to put the lines on the side opposite the disc brake. That's where they were on the original hub and it is closer to the reference line on the chain guard |