Modifiche al passo #6
Righe Passo
| - | [* black] Use a philips head screwdriver to unscrew the screws attaching the plunger tube end cap to the plunger tube |
|---|---|
| + | [* black] Use a philips head screwdriver to unscrew the screws attaching the plunger tube end cap to the plunger tube. Then, pull out the plunger to reveal the worn-out O-ring on the plunger head. |
| [* icon_note] Evenly unscrew both screws for a smooth disassembly. | |
| - | [* icon_reminder] When reassembling, a strong spring will increase the risk of stripping the screws and difficulty in reassembly. Use a screwdriver bigger than the slot and push hard into the end cap for the best results. |
| + | [* icon_reminder] When reassembling, a strong spring will increase the risk of stripping the screws and difficulty in reassembly. Use a screwdriver slightly bigger than the slot and push hard into the end cap for the best results. |
| [* black] You can tell if your O-ring is worn-out when it swells past its advertised dimensions, allowing it to sag or slip. |