Aggiusta le tue cose Community Store

Modifiche al passo #6

Modifica di Jamie Ho —

Modifica approvata da Jamie Ho

Prima di
Dopo il
Invariato

Righe Passo

[* black] Use a philips head screwdriver to unscrew the screws attaching the plunger tube end cap to the plunger tube and pull out the plunger to reveal the worn-out O-ring on the plunger head.
-[* icon_note] Tip: Evenly unscrew both screws for a smooth disassembly.
-[* icon_note] Tip: You can tell if your O-ring is worn-out when it swells past its advertised dimensions, allowing it to sag or slip.
+[* icon_note] Evenly unscrew both screws for a smooth disassembly.
+[* icon_note] You can tell if your O-ring is worn-out when it swells past its advertised dimensions, allowing it to sag or slip.