Modifiche al passo #4
Modifica di Kristen Gismondi —
Modifica approvata da Kristen Gismondi
- Prima di
- Dopo il
- Invariato
Righe Passo
| - | [* red] Use a philips head screwdriver to unscrew all screws holding the blaster shell together (check the pistol grip and stock mount for more screws). |
|---|---|
| - | [* black] Consider using a magnet (any kind will do) to pick up all loose screws. |
| - | [* black] Once all screws are loose, lift the top half and set it aside to reveal the internals. |
| - | [* icon_reminder] Two screws are longer and shorter than the rest. Remember the positions of these screws (longer are orange and shorter are yellow) when reassembling. |
| + | [* red] Remove all screws holding the blaster shell together using a Phillips #00 screwdriver. |
| + | [* icon_note] Check the pistol grip and stock mount for more screws. |
| + | [* orange] Two screws are longer than the rest. |
| + | [* yellow] Two screws are shorter than the rest. |
| + | [* icon_reminder] Remember the positions of these screws when reassembling. |
| + | [* icon_note] Consider using a magnet to pick up all loose screws. |
| + | [* black] Lift the top half and set it aside to reveal the internals. |