Aggiusta le tue cose Community Store

Modifiche al passo #4

Modifica di Jamie Ho —

Modifica approvata da Jamie Ho

Prima di
Dopo il
Invariato

Righe Passo

[* black] Use a philips head screwdriver to unscrew all screws holding the blaster shell together.
[* black] Consider using a magnet (any kind will do) to pick up all loose screws.
[* black] Once all screws are loose, lift the top half and set it aside to reveal the internals.
-[* icon_note] Tip: Two screws are longer and shorter than the other screws. Remember the positions of these screws when reassembling.
-[* icon_note] Tip: The orange nerf rail tooth and corresponding spring may fly out when removing the top shell half. If so, store both with the removed screws.
+[* icon_note] Two screws are longer and shorter than the rest. Remember the positions of these screws when reassembling.
+[* icon_note] The orange nerf rail tooth and corresponding spring may fly out when removing the top shell half. If so, store both with the removed screws.