Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #6

Modifica in base a Austin Blakely-

Modifica approvata da Austin Blakely

Prima di
Dopo il
Invariato

Righe Passo

[* yellow] Use a flathead screwdriver to release the two clips located on the back half of the drive assembly.
[* icon_note] The final clip doesn't need to be released; the top half of the drive assembly will slide away from the lower half.
[* black] Finish removing the top half of the drive assembly from the base.
[* icon_caution] Be careful not to detacheddetach the red wire or the white ribbon cable still attached.
[* icon_caution] Be careful not to detacheddetach the red wire or the white ribbon cable still attached.