Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche al passo #1

Modifica in base a Lauren-

Modifica approvata da Lauren

Prima di
Dopo il
Invariato

Righe Passo

[* black] At this point, your optical drive assembly should be separated from your GameCube (picture 1).
[* black] Flip the optical drive assembly upside down
[* red] Shown in picture 2, remove the 6 Phillips #1 screwsscrews with a philips screwdriver.
[* red] Shown in picture 2, remove the 6 Phillips #1 screwsscrews with a philips screwdriver.
[* black] Once the screws are removed, gently lift and remove the metal plate (shown in picture 3).
[* icon_caution] Be careful not to disturb the brown ribbon cable (highlighted in the yellow).