Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #1

Modifica in base a Lauren-

Modifica approvata da Lauren

Prima di
Dopo il
Invariato

Righe Passo

[* black] At this point, your optical drive assembly should be separateseparated from your GameCube (picture 1).
[* black] Flip the optical drive assembly overupside down
[* red] RemoveShown in picture 2, remove the 6 Phillips #1 screws as shownscrews.
[* yellowblack] Once the screws are removed, gently lift and remove the metal plateplate (shown in picture 3).
[* icon_caution] Be careful not to disturb the brown ribbon cablecable (highlighted in the yellow).
[* black] At this point, your optical drive assembly should be separateseparated from your GameCube (picture 1).
[* black] Flip the optical drive assembly overupside down
[* red] RemoveShown in picture 2, remove the 6 Phillips #1 screws as shownscrews.
[* yellowblack] Once the screws are removed, gently lift and remove the metal plateplate (shown in picture 3).
[* icon_caution] Be careful not to disturb the brown ribbon cablecable (highlighted in the yellow).