Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #1

Modifica in base a Lauren-

Modifica approvata da Lauren

Prima di
Dopo il
Invariato

Righe Passo

[* black] At this point, your optical drive assembly should be separate from your GameCube (picture 1).
[* redblack] Flip the optical drive assembly over and remove
[* red] Remove
the 6 Phillips #1 screws as shown.
[* yellow] AfterOnce the screws are removed, gently lift and remove the metal plate.
[* icon_caution]
Be careful not to disturb the brown ribbon cable.
[* redblack] Flip the optical drive assembly over and remove
[* red] Remove
the 6 Phillips #1 screws as shown.
[* yellow] AfterOnce the screws are removed, gently lift and remove the metal plate.
[* icon_caution]
Be careful not to disturb the brown ribbon cable.