Salta al contenuto principale

Modifiche al passo #13

Modifica in base a Julio-

Modifica rifiutata da Jake Devincenzi

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Put pieces of the sticker tape along the inner frame of the phone. also use any smaller pieces to fill in as much of the area.
[* black] make note when removing old adhesive where to put new adhesive. Also ensure you remove all old adhesive or you will have trouble setting the glass. DONT OVERLAP TAPE it will cause a bump to form that may compromise your new glass.
[* black] Put pieces of the sticker tape along the inner frame of the phone. also use any smaller pieces to fill in as much of the area.
[* black] make note when removing old adhesive where to put new adhesive. Also ensure you remove all old adhesive or you will have trouble setting the glass. DONT OVERLAP TAPE it will cause a bump to form that may compromise your new glass.
[* black] Clean up the digitizer with lint free wipes or a clean microfiber towel. I used some lens cleaner to leave it spotless and smudge free.