Salta al contenuto principale

Modifiche al passo #12

Modifica in base a Julio-

Modifica rifiutata da Jake Devincenzi

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Clean up the glue that remains on the borders. A small microfiber with a bit of WD40 or windex can help you take all the glue off.
[* icon_note] Be sure to not use too much WD40 or windex.
[* black] Cut up two small 1mm pieces ofa 1 or 2 mm piece that will fit in the sticker tapemiddle part of the cable. DO NOT PLACE BEHIND BUTTONS DOING SO WILL CAUSE MALFUNCTIONING, and glue the buttonsyou made it this far you don't want to the phone to keep them in place.repeat that right?
[* black] Cut up two small 1mm pieces ofa 1 or 2 mm piece that will fit in the sticker tapemiddle part of the cable. DO NOT PLACE BEHIND BUTTONS DOING SO WILL CAUSE MALFUNCTIONING, and glue the buttonsyou made it this far you don't want to the phone to keep them in place.repeat that right?
[* icon_note] It's very important to make sure the buttons line up exactly with the picture.