Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Kristen Gismondi-

Modifica approvata da Kristen Gismondi

Prima di
Dopo il
Invariato

Righe Passo

-[* black] Unscrew the screws around the back plate with a T5 Torx Screwdriver.
- [* red] Six black 6.9 mm Torx screws
-[* black] Unscrew the screw next to the antennae on the back plate.
- [* orange] One 9.75 mm Phillips antenna screw with a Phillips #00 Screwdriver.
+[* red] Remove the six 6.9 mm screws around the back plate with a T5 Torx screwdriver.
+[* orange] Remove the single 9.8 mm screw next to the antennae on the back plate using a Phillips #00 screwdriver.