Aggiusta le tue cose Community Store

Modifiche al passo #4

Modifica di Christian Zavala —

Modifica approvata da Christian Zavala

Prima di
Dopo il
Invariato

Righe Passo

-[* black] Flip the motherboard to the side with the white plastic housing. Place the flat end of the spudger tool underneath the round black rumble motor and lightly push up.
-[* black] Tilt the motherboard to the left and the rumble motor will fall out of the white housing.
-[* icon_caution] Be gentle with the rumble motor. Do not pull it out of the plastic housing. This could rip the wires out of the motherboard
+[* black] Flip the motherboard on its side with the rumble motor and the white plastic housing facing up.
+[* black] Place the flat end of the spudger tool under the round rumble motor and lightly push up.
+[* black] Tilt the motherboard to the left and the rumble motor will fall out of the white housing. Do not pull the rumble motor out, this could cause the wires to rip from the motherboard.