Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Michael Dooley-

Modifica approvata da Michael Dooley

Eliminato
Aggiunto
Invariato

Righe Passo

[* blackred] Remove the 2mm screws on the copper heat sink on the left side of devicethe device.
[* black] Use a flathead screwdriver to remove the heat sink. Make sure to remove the adhesive tape from the top of the heat sink.
[* blackred] Remove the 2mm screws on the copper heat sink on the left side of devicethe device.
[* black] Use a flathead screwdriver to remove the heat sink. Make sure to remove the adhesive tape from the top of the heat sink.