Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Matthew Cristler-

Modifica approvata da Matthew Cristler

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Pry open the back of the phone using a spudger or blue opening tool.
[* black]
There is a tabare four clips, one on the left and right side and two on the bottom of the phone. You can rotate the phone that will remain attached when you take this piece offleft and right to get easier access while prying.
[* icon_caution] Make sure to fold back of phone down (or left depending on your orientation) after separating from body as there is ribbon connecting the back to the phone's body which can be ripped if pulled the wrong way
.
[* black] Pry open the back of the phone using a spudger or blue opening tool.
[* black]
There is a tabare four clips, one on the left and right side and two on the bottom of the phone. You can rotate the phone that will remain attached when you take this piece offleft and right to get easier access while prying.
[* icon_caution] Make sure to fold back of phone down (or left depending on your orientation) after separating from body as there is ribbon connecting the back to the phone's body which can be ripped if pulled the wrong way
.
[* icon_caution] The tab as well as the plastic clips are very fragile here, be careful when disassembling them.
[* icon_caution] Make sure to fold back of phone to the left after separating from body as there is ribbon connecting the back to the phone's body which can be ripped if pulled the wrong way.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Eliminato