Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Alec-

Modifica approvata da Alec

Eliminato
Aggiunto
Invariato

Righe Passo

[* red] Using a Phillips 1#1 screwdriver, unscrew the two screws on the left-hand side of the hard drive cover until you hear a click.
[* red] Using a Phillips 1#1 screwdriver, unscrew the two screws on the left-hand side of the hard drive cover until you hear a click.
[* icon_note] These screws don't come out of the cover. Just unscrew until you hear a click, then move to the next screw.