Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Ken Gage-

Modifica approvata da Ken Gage

Eliminato
Aggiunto
Invariato

Righe Passo

[* red] Use a Phillips #1 screwdriver to unscrewloosen the two screws on the bottom left-hand side of the hard drive cover.
[* red] Use a Phillips #1 screwdriver to unscrewloosen the two screws on the bottom left-hand side of the hard drive cover.
[* red] Turn each screw until you hear a click.
[* icon_note] These are captive panel screws and don't come out of the cover.
[* icon_note] These are captive panel screws and don't come out of the cover.