Salta al contenuto principale

Modifiche al passo #7

Modifica in base a Julien Blarel-

Modifica approvata da Julien Blarel

Eliminato
Aggiunto
Invariato

Righe Passo

[* red] Locate the connection holding the bottom cover to the logic board.
[* black]
Use a plastic opening tool to pry upoff the white connectorzip connector which is joining the wires to the logic board.
[* red] Locate the connection holding the bottom cover to the logic board.
[* black]
Use a plastic opening tool to pry upoff the white connectorzip connector which is joining the wires to the logic board.
[* icon_caution] Don't pull the cables. Take your time using the plastic opening tool.
[* black] The bottom cover will now completely detach from the logic board.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Vecchia Versione

Nuova Versione