Salta al contenuto principale

Modifiche al passo #5

Modifica in base a Bryan Cervantes-

Modifica approvata da Bryan Cervantes

Eliminato
Aggiunto
Invariato

Righe Passo

[* red] Locate the two clips holding the top and bottom cover together.
[* black] Insert the flat end of a spudger between the back speaker and the back cover.
[* orange] Place the flat end of the spudger behind theone clip and pry clipit open.
[* icon_note] Hold bottom cover open so the clip will not fall back into place. One clip remains to be removed.
[* orange] Place the flat end of the spudger behind theone clip and pry clipit open.
[* icon_note] Hold bottom cover open so the clip will not fall back into place. One clip remains to be removed.