Salta al contenuto principale

Modifiche a questo Step

Modifica in base a Craig Cary-

Modifica approvata da Craig Cary

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] RotateOrient the device so you have a side view and are looking towardsat the back coverside and the bottom cover of the iD95.
[* red] Insert a spudger in betweenyellow] Between the back of the speaker and the back panelpanel, two clips hold the top and bottom covers together. Locate these clips.
[* orange] LocateWith the clip behindclips detached, you can see a closer image of the clips.
[* red] Insert the flat end of the spudger between
the back coverof the speaker and pry open. Apply same techniquethe back panel to detach the other clipclips.
[* icon_note] Once you pry one clip open, hold the bottom cover in place so the the clip does not fall back in place.
[* yellow] These are
Apply same technique to the two clips holding the top cover and bottom coverother clip.
[* black] RotateOrient the device so you have a side view and are looking towardsat the back coverside and the bottom cover of the iD95.
[* red] Insert a spudger in betweenyellow] Between the back of the speaker and the back panelpanel, two clips hold the top and bottom covers together. Locate these clips.
[* orange] LocateWith the clip behindclips detached, you can see a closer image of the clips.
[* red] Insert the flat end of the spudger between
the back coverof the speaker and pry open. Apply same techniquethe back panel to detach the other clipclips.
[* icon_note] Once you pry one clip open, hold the bottom cover in place so the the clip does not fall back in place.
[* yellow] These are
Apply same technique to the two clips holding the top cover and bottom coverother clip.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 3

Vecchia Versione

Nuova Versione