Salta al contenuto principale

Modifiche a questo Step

Modifica in base a Bryan Cervantes-

Modifica approvata da Bryan Cervantes

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Rotate the device so you have a side viewview and are looking towards the back cover.
[* red] Insert a spudger in between the back of the speaker and the back panel to remove two clips holdingpanel.
[* orange] Locate
the topclip behind the back cover and pry open. Apply same technique to the other clip.
[* icon_note] Once you pry one clip open, hold the
bottom cover togetherin place so the the clip does not fall back in place.
[* orangeyellow] These are the two clipsclips holding the top cover and bottom cover.
[* black] Rotate the device so you have a side viewview and are looking towards the back cover.
[* red] Insert a spudger in between the back of the speaker and the back panel to remove two clips holdingpanel.
[* orange] Locate
the topclip behind the back cover and pry open. Apply same technique to the other clip.
[* icon_note] Once you pry one clip open, hold the
bottom cover togetherin place so the the clip does not fall back in place.
[* orangeyellow] These are the two clipsclips holding the top cover and bottom cover.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Vecchia Versione

Nuova Versione

Immagine 3

Vecchia Versione

Nuova Versione