Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Julien Blarel-

Modifica approvata da Julien Blarel

Eliminato
Aggiunto
Invariato

Righe Passo

[* icon_caution] Be careful pulling the side panels out. Don't applynot to use too much force or you might break the plastic rings holding the side panels could breakin place.
[* icon_caution] Be careful pulling the side panels out. Don't applynot to use too much force or you might break the plastic rings holding the side panels could breakin place.
[* red] The side panels have plastic rings that will need to be lifted up and off the cylinders around which they are placed. Take a look at the second image for an idea of what you are up against.
[* black] Lift the the top cover. Then pull the side panel first up and then out, away from the device.
[* black] Make sure both side panel rings have been removed from their cylinders. Once this is done the side panel will detach from the device.