Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Julien Blarel-

Modifica approvata da Julien Blarel

Eliminato
Aggiunto
Invariato

Righe Passo

[* icon_caution] Be careful pulling the side panels out. Don't apply too much force or the plastic arcsrings holding the side panels could break.
[* red] The side panels have plastic rings that will need to be lifted up and off the cylinders around which they are placed. Take a look at the second image for an idea of what you are up against.

[* black] Lift the the top cover andcover. Then pull the side panel out towards youfirst up and then out, away from the device.
[* black] TheMake sure both side panel rings have been removed from their cylinders. Once this is done the side panel shouldwill detach from the device.
[* icon_caution] Be careful pulling the side panels out. Don't apply too much force or the plastic arcsrings holding the side panels could break.
[* red] The side panels have plastic rings that will need to be lifted up and off the cylinders around which they are placed. Take a look at the second image for an idea of what you are up against.

[* black] Lift the the top cover andcover. Then pull the side panel out towards youfirst up and then out, away from the device.
[* black] TheMake sure both side panel rings have been removed from their cylinders. Once this is done the side panel shouldwill detach from the device.

Immagine 2

Vecchia Versione

Nuova Versione