Salta al contenuto principale

Modifiche a questo Step

Modifica in base a Craig Cary-

Modifica approvata da Craig Cary

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Flip over the iD95 onto the bottom cover so the front LCD is facing you.
[* icon_note] The top cover is attached to the bottom cover by means of two clips on the back of the iD95. The top cover will not fully detach in the next two steps.
[*
black] Lift the front left corner untilof the front portion detachestop cover to detach it from the base.
[* icon_note] The top cover is attached to the bottom cover by means of two clips on the back of the iD95. The top cover will not fully detach in the next two steps.
[*
black] Lift the front left corner untilof the front portion detachestop cover to detach it from the base.
[* black] Apply the same technique to the front right corner of the top cover.
[* icon_note] The top cover is attached to the bottom cover by means of two clips. Leave the front portion propped open.