Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Bryan Cervantes-

Modifica approvata da Bryan Cervantes

Eliminato
Aggiunto
Invariato

Righe Passo

[* icon_caution] The bottom cover is attached to the back cover by two plastic clips. Don't use excessive force.
[* black] Insert a plastic opening tool between the edge of the bottom cover and the main body.
[* black] Slightly separatepry the bottom cover from the body by prying the two apartbody. Start anywhere along the front side of the deviceiD95 and work your way around.
[* icon_caution] The bottom cover will not completely lift off since two clips on the back of the iD95 attach it to the bottom cover. Don't use excessive force.

[* black] HoldGrip the bottom portion of the device and gently lift the front part of the bottom cover a couple inchescentimeters up.
[* black] Slightly separatepry the bottom cover from the body by prying the two apartbody. Start anywhere along the front side of the deviceiD95 and work your way around.
[* icon_caution] The bottom cover will not completely lift off since two clips on the back of the iD95 attach it to the bottom cover. Don't use excessive force.

[* black] HoldGrip the bottom portion of the device and gently lift the front part of the bottom cover a couple inchescentimeters up.