Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Vincent Chan-

Modifica approvata da Vincent Chan

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Insert a plastic opening tool between the edge of the bottom cover and the main body.
[* black] Slightly separate the bottom cover from the body by prying the two apart. Start anywhere along the front side of the device and work your way around.
[* icon_caution] The bottom cover will not completely lift off since two clips on the back of the iD95 attach it to the topbottom cover. Don't use excessive force.
[* icon_caution] The bottom cover will not completely lift off since two clips on the back of the iD95 attach it to the topbottom cover. Don't use excessive force.
[* black] Hold the bottom portion of the device and gently lift the front part of the bottom cover a couple inches up.