Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Julien Blarel-

Modifica approvata da Julien Blarel

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Insert a plastic opening tool between the edge of the bottom cover and the main body.
[* black] Slightly separate the bottom cover from the body by prying from the right side, acrosstwo apart. Start anywhere along the front, tofront side of the left sidedevice and work your way around.
[* black] Slightly separate the bottom cover from the body by prying from the right side, acrosstwo apart. Start anywhere along the front, tofront side of the left sidedevice and work your way around.
[* icon_caution] The bottom cover will not completely lift off since two clips on the back of the iD95 attach it to the top cover. Don't use excessive force.
[* black] Using your hands, prop openHold the bottom portion of the device and gently lift the front part of the bottom cover by lifting with moderate forcea couple inches up.
[* black] Using your hands, prop openHold the bottom portion of the device and gently lift the front part of the bottom cover by lifting with moderate forcea couple inches up.