Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Bryan Cervantes-

Modifica approvata da Bryan Cervantes

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Insert a plastic opening tool on the right side of the iD95 between the edge of the bottom cover and the main body.
[* black] Insert a plastic opening tool on the right side of the iD95 between the edge of the bottom cover and the main body.
[* black] Slightly separate the bottom cover from the body by prying from the right side, across the front, to the left side.
[* icon_caution] The bottom cover will not completely lift off since two clips on the back of the iD95 attach it to the top cover. Don't use excessive force.
[* black] Using your hands, prop open the front part of the bottom cover by lifting with moderate force.

Immagine 2

Vecchia Versione

Nuova Versione

Immagine 3

Eliminato