Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Craig Cary-

Modifica approvata da Craig Cary

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Insert a plastic opening tool alongon the right side of the iD95 between the bottom edge of the bottom covercover and the main body.
[* black] Pry openSlightly separate the bottom cover from the body by going alongprying from the edge. Make your way aroundright side, across the device. This should liftfront, to the cover slightlyleft side.
[* black] With your hands, grab the front part of the bottom cover and lift with moderate force.
[* icon_note
icon_caution] The bottom cover will not completely lift off since two clips on the back of the iD95 attach it is attached to the top cover by two clips. Leavecover. Don't use excessive force.
[* black] Using your hands, prop open the front part of
the bottom cover partially openedby lifting with moderate force.
[* black] Insert a plastic opening tool alongon the right side of the iD95 between the bottom edge of the bottom covercover and the main body.
[* black] Pry openSlightly separate the bottom cover from the body by going alongprying from the edge. Make your way aroundright side, across the device. This should liftfront, to the cover slightlyleft side.
[* black] With your hands, grab the front part of the bottom cover and lift with moderate force.
[* icon_note
icon_caution] The bottom cover will not completely lift off since two clips on the back of the iD95 attach it is attached to the top cover by two clips. Leavecover. Don't use excessive force.
[* black] Using your hands, prop open the front part of
the bottom cover partially openedby lifting with moderate force.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Vecchia Versione

Nuova Versione

Immagine 3

Eliminato