Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Craig Cary-

Modifica approvata da Craig Cary

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Insert a plastic opening tool alongon the right side of the iD95 between the bottom edge of the bottom covercover and the main body.
[* black] Pry openSlightly separate the bottom cover from the body by going alongprying from the edge. Make your way aroundright side, across the device. This should liftfront, to the cover slightly.
[* black] With your hands, grab the front part of the bottom cover and lift with moderate force
left side.
[* icon_noteicon_caution] The bottom cover will not completely lift off since two clips attach it is attached to the top cover by two clips. Leavecover.
[* black] Using your hands, prop open the front part of
the bottom cover partially openedby lifting with moderate force.
[* black] Insert a plastic opening tool alongon the right side of the iD95 between the bottom edge of the bottom covercover and the main body.
[* black] Pry openSlightly separate the bottom cover from the body by going alongprying from the edge. Make your way aroundright side, across the device. This should liftfront, to the cover slightly.
[* black] With your hands, grab the front part of the bottom cover and lift with moderate force
left side.
[* icon_noteicon_caution] The bottom cover will not completely lift off since two clips attach it is attached to the top cover by two clips. Leavecover.
[* black] Using your hands, prop open the front part of
the bottom cover partially openedby lifting with moderate force.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Vecchia Versione

Nuova Versione

Immagine 3

Eliminato