Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Lilia Johnson-

Modifica approvata da Lilia Johnson

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] When allAfter each screws are removed,has been removed carefully turn over the controllercontroller, and place on a flat surface.
[* black] Slowly liftseparate the now freetop panel from the top of the controllerbottom panel.
[* icon_noteicon_reminder] The buttons are loose and may fall off of the motherboard.
[* black] Once lifted,seperarted set aside the top panel.
[* icon_remindericon_note] During reassembly, make sure the front panel lines up with the buttons so they slide back into place.
[* black] When allAfter each screws are removed,has been removed carefully turn over the controllercontroller, and place on a flat surface.
[* black] Slowly liftseparate the now freetop panel from the top of the controllerbottom panel.
[* icon_noteicon_reminder] The buttons are loose and may fall off of the motherboard.
[* black] Once lifted,seperarted set aside the top panel.
[* icon_remindericon_note] During reassembly, make sure the front panel lines up with the buttons so they slide back into place.