Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Garrett Leung-

Modifica approvata da Garrett Leung

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] When all screws are removed, carefully turn over the controller and place on a flat surface.
[* black] Slowly lift the now free panel from the top of the controller.
[* blackicon_reminder] Once lifted, set aside the panel for reassemblypanel. During reassembly, make sure all buttons are in their respective sockets so they match up.
[* blackicon_reminder] Once lifted, set aside the panel for reassemblypanel. During reassembly, make sure all buttons are in their respective sockets so they match up.