Modifiche al passo #4
Modifica di Jeanette Lopez —
Modifica approvata da Jeanette Lopez
- Prima di
- Dopo il
- Invariato
Righe Passo
| - | [* red] Use a Phillips #1 screwdriver to remove the five 6-mm screws in the keyboard slot. |
|---|---|
| + | [* icon_caution] CAUTION: do not allow hardware or debris into the CPU fan and duct. |
| + | [* red] Use a Phillips #1 screwdriver to remove the five 6-mm screws in the keyboard slot. |
| [* icon_note] These are not captive panel screws and, once loosened, will be free to move about the assembly. | |
| - | [* icon_caution] Be careful not to allow loosened fasteners into the CPU fan and duct (located in the upper left). |