Modifiche al passo #4
Modifica di Inah Embile —
Modifica approvata da Inah Embile
- Prima di
- Dopo il
- Invariato
Righe Passo
| [* red] Use a Phillips #1 screwdriver to remove the five 6-mm screws in the keyboard slot. | |
| - | [* icon_caution] These are not captive panel screws and, once loosened, will be free to move about the assembly. Be careful not to allow either fastener into the CPU fan and duct (located in the upper left). |
| + | [* icon_note] These are not captive panel screws and, once loosened, will be free to move about the assembly. |
| + | [* icon_caution] Be careful not to allow either fastener into the CPU fan and duct (located in the upper left). |