Modifiche al passo #3
Modifica di Jeanette Lopez —
Modifica approvata da Jeanette Lopez
- Prima di
- Dopo il
- Invariato
Righe Passo
| - | [* red] Remove the two 3-mm screws at the top edge of the keyboard using a Phillips #00 screwdriver. |
|---|---|
| + | [* icon_caution] CAUTION: do not allow hardware or debris into the CPU fan and duct. |
| + | [* red] Remove the two 3-mm screws at the top edge of the keyboard using a Phillips #00 screwdriver. |
| [* icon_note] These are not captive panel screws and, once loosened, will be free to move about the assembly. | |
| - | [* icon_caution] Be careful not to allow either fastener into the CPU fan and duct (not shown). |