| - | [* red] Using the Phillips 1 or Phillips 00 screwdriver, remove the screws from the card with black and white wires coming off of it. |
|---|
| - | [* icon_note] Our card has one screw that required a Philips 1 and one that required a Philips 00. Start with the Philips 1 and, if it doesn't fit, use the Philips 00. |
|---|
| + | [* red] Using the Phillips #1 or Phillips #00 screwdriver, remove the two 3-mm screws from the card with black and white wires coming off of it. |
|---|
| + | [* icon_note] Our card has one screw that required a Philips #1 and one that required a Philips #00. Start with the Philips #1 and, if it doesn't fit, use the Philips #00. |
|---|