Salta al contenuto principale

Modifiche al passo #4

Modifica in base a bushing-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] You'llred] You will see the hard drive attached to the metal plate. Unplug the ATA/IDE cable from the logic board to completely separate the metal plateplate from the logic board.
[* icon_reminder] Don't forget to reconnect the cable before closing the unit back up, or you will see a flashing ? mark on your TV when you power it up
.
[* black] You'llred] You will see the hard drive attached to the metal plate. Unplug the ATA/IDE cable from the logic board to completely separate the metal plateplate from the logic board.
[* icon_reminder] Don't forget to reconnect the cable before closing the unit back up, or you will see a flashing ? mark on your TV when you power it up
.

Immagine 2

Vecchia Versione

Nuova Versione