Modifiche al passo #2
Righe Passo
| - | [* red] Using fine tip tweezers, disconnect the four electrical connectors on the board surface. |
|---|---|
| + | [* red] Using fine tip [product|IF145-020|tweezers], disconnect the four electrical connectors on the board surface. |
| [* icon_caution] The connectors are secured with an adhesive that may need to be gently scraped off. | |
| [* orange] Using a Phillips #00 screwdriver, remove the two 5mm screws on either side of the motor. | |
| [* black] Lift the motor from the board and set it to the side. | |
| [* yellow] Using a Phillips #00 screwdriver, remove the 6mm screw from the antenna housing. |