Modifiche al passo #1
Modifica di Joseph Casalino —
Modifica approvata da Kyle Smith
- Prima di
- Dopo il
- Invariato
Righe Passo
| [title] Battery removal and replacement | |
| - | [* black] Use a nylon spudger to disconnect the two |
| + | [* black] Use a nylon spudger to disconnect the two connectors holding down the battery: one on the bottom (it has a pair of connectors) and one on the top attached to the battery. |
| [* icon_caution] There is adhesive holding down the battery so be careful when removing it. | |
| - | [* black] Starting from the outside, slide a flat credit card or pick underneath the battery |
| + | [* black] Starting from the outside, gradually slide a flat credit card or pick back and forth underneath the battery to separate the battery from the adhesive. |
| [* black] Remove the old battery, and replace it with the new BL-T39. Be sure to press it into the adhesive for good contact. | |
| + | [* black] Snap the connector attached to the new battery onto the system board, then snap the connectors from the phone antennas back into place. |