Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Joseph Goodwin-

Modifica approvata da Joseph Goodwin

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Locate the microphone component on your Lyra X2400. If you are having difficulty locating this component the logic board sopicture to the left will shoe you may begin desolderingwhere it is located.
[* black] Start using solder/desolder tools to remove the microphone.
[* black] Once removed replace it with the new working microphone.
[* black] Use the soldering tools to reattach
the electrical component in orderback to replace itthe main logic board.
[* black] Locate the microphone component on your Lyra X2400. If you are having difficulty locating this component the logic board sopicture to the left will shoe you may begin desolderingwhere it is located.
[* black] Start using solder/desolder tools to remove the microphone.
[* black] Once removed replace it with the new working microphone.
[* black] Use the soldering tools to reattach
the electrical component in orderback to replace itthe main logic board.

Immagine 1

Nessuna immagine precedente.

Aggiunto