Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche al passo #5

Modifica in base a Sam Omiotek-

Modifica approvata da Sam Omiotek

Prima di
Dopo il
Invariato

Righe Passo

[* black] Use your fingers to gently pull the ribbon cable straight out of its connector on the motherboard.
[*

[*
icon_note] Always useSince this cable's pull tabs wherever possible. If the pull tabs aretab is too small to grab with your fingers or tweezers, grab the cable itself and ''gently'' disconnect ititself. Otherwise utilize pull tabs whenever possible.
[* icon_reminder] GrabDuring reassembly, grab the ribbon cable by the blue pull tab and gently press the cable straight into the connector. Try to exert force onPush the pullblue tab rather than the ribbon cable itself.
[* black] Use your fingers to gently pull the ribbon cable straight out of its connector on the motherboard.
[*

[*
icon_note] Always useSince this cable's pull tabs wherever possible. If the pull tabs aretab is too small to grab with your fingers or tweezers, grab the cable itself and ''gently'' disconnect ititself. Otherwise utilize pull tabs whenever possible.
[* icon_reminder] GrabDuring reassembly, grab the ribbon cable by the blue pull tab and gently press the cable straight into the connector. Try to exert force onPush the pullblue tab rather than the ribbon cable itself.