Modifiche al passo #1
Modifica di Hareti —
Modifica rifiutata da Adam O'Camb
- Prima di
- Dopo il
- Invariato
Righe Passo
| + | [* icon_note] Rotate the iPad so that you are looking parallel to the battery, there are two screws inside the connector - not the two that are visible from the front |
|---|---|
| + | [* icon_caution] Do not remove the two screws on the top of the Lightning connector housing. There is glue holding it to the frame from the bottom. |
| [* red] Remove the two 2.9 mm Phillips #00 screws securing the Lightning connector to the rear case. |