Aggiusta le tue cose Community Store

Modifiche al passo #9

Modifica di Walter Galan —

Modifica approvata da Walter Galan

Prima di
Dopo il
Invariato

Righe Passo

-[* red] Remove the two 2.1 mm Phillips screws securing the logic board bracket to the rear case near the digitizer cable socket.
-[* black] Remove the logic board bracket from the rear case.
+[* red] Remove the two 2.1 mm Phillips screws securing the second metal bracket to the rear case near the digitizer cable socket.
+[* black] Remove the metal bracket from the rear case.