Modifiche al passo #5
Righe Passo
| + | [title] Main board removal |
|---|---|
| + | [* black] Remove the nut and washer holding the 6.25mm guitar input jack to the chassis |
| + | [* black] Disconnect any wires going from the board to other parts of the chassis, such as to the power switch or power transformer |
| + | [* black] Identify and remove any other screws that might prevent removal of the board. On my Ibanez, two screws held the power amplifier IC heat-sink to the chassis. Removal of the screws and their accompanying lock washers allowed the board to be lifted off with the heat-sink |
Immagine 1
Nessuna immagine precedente.
Aggiunto
Immagine 2
Nessuna immagine precedente.
Aggiunto
Immagine 3
Nessuna immagine precedente.
Aggiunto