Salta al contenuto principale

Modifiche al passo #6

Modifica in base a Tarun Thiruma-

Modifica approvata da Tarun Thiruma

Prima di
Dopo il
Invariato

Righe Passo

[title] Remove the camera module casing
[* black] If you removed the camera module's internal components without its plastic casing, apply a few drops of high concentration (over 90%) isopropyl alcohol around the edges of the casing to soften the adhesive securing it into place.
- [* icon_note] Give the alcohol a minute to penetrate the adhesive.
+ [* icon_note] Allow the alcohol 1-2 minutes to penetrate the adhesive.
[* black] Use a pair of tweezers to remove the plastic camera casing.