Salta al contenuto principale

Modifiche al passo #1

Modifica in base a tk-

Modifica approvata da Andrew Optimus Goldheart

Eliminato
Aggiunto
Invariato

Righe Passo

[* blue] Remove the two (2) dummy cards from the laptop.
[* blue] Using a phillips head screwdriver, unscrew the six (6) screws from the bottom of the laptop.
[* blue] Unscrew the two (2) screws from the back of the laptop, located at the extreme left and right of the back panel.
[* blue] Slide bottom cover forward and lift upwards to remove. You may need to use a strong spudger to force a gap along the base edge from the ethernet port on the right, to the kensington port on the left.
[* blue] Slide bottom cover forward and lift upwards to remove. You may need to use a strong spudger to force a gap along the base edge from the ethernet port on the right, to the kensington port on the left.