Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #3

Modifica in base a Josh-

Modifica approvata da Josh

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Pull upThere are two tabs that sit underneath the rearsides of the face plate. They have a tendency to break out the plastic over top metallic cabinetof them while removing the covers. To help prevent this, push inward on the side of the cover, just behind the face plate as you take off the covers.
[* black] Slide cabinetLift up on the rear of the top cover, and slide it towards the back of the radio to release frontdisengage the three tabs at the front.
[* black] Turn the radio over, and repeatRepeat for the bottom metallic cabinetcover of the radio.
[* black] Pull upThere are two tabs that sit underneath the rearsides of the face plate. They have a tendency to break out the plastic over top metallic cabinetof them while removing the covers. To help prevent this, push inward on the side of the cover, just behind the face plate as you take off the covers.
[* black] Slide cabinetLift up on the rear of the top cover, and slide it towards the back of the radio to release frontdisengage the three tabs at the front.
[* black] Turn the radio over, and repeatRepeat for the bottom metallic cabinetcover of the radio.

Immagine 1

Nessuna immagine precedente.

Aggiunto

Immagine 2

Nessuna immagine precedente.

Aggiunto

Immagine 3

Nessuna immagine precedente.

Aggiunto