Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #4

Modifica in base a Andrew Bookholt-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* icon_caution] In this step you will disconnect the camera cable. Most machines will have a small self adhesive plastic retainer stuck to the logic board to keep the connector in place. Before disconnecting the cable, be sure this retainer is moved out of the way.
[* black] Pull the camera cable connector toward the optical drive to disconnect it from the logic board.
[* icon_note] This socket is metal and easily bent. Be sure to align the connector with its socket on the logic board before mating the two pieces.