Salta al contenuto principale

Modifiche al passo #2

Modifica di Forrest Born

Modifica approvata da Forrest Born

Prima di
Dopo il
Invariato

Righe Passo

+[title] Unscrew Bottom of Processor Fan
+[* yellow] Remove power wire connector.
+[* orange] Remove two (2) #1 Phillips screws from the top of the Fan Module.
+[* black] Carefully lift the fan module out of the system and replace it with a new one.
+[* icon_caution] When reinstalling screws only tighten them finger tight. They will strip if over-tightened.

Immagine 1

Nessuna immagine precedente.

Aggiunto

Immagine 2

Nessuna immagine precedente.

Aggiunto